Most of the time, businesses will spend lots of money to buy their lift trucks. It is vital, therefore to take good care of your equipment to protect your investment into the long run. It is a great idea to know the procedures which are carried out during maintaining and taking care of this equipment.
By starting up the forklift and listening closely how it works is one of the best ways to tell how good the engine is performing. Like for instance, if there are any misses or knocks, the machine is faulty and this must raise several concerns. Additionally listen closely for any squealing noise which come from the belts because these noises would provide you with a lot of information.
When carrying out maintenance, several of the main components you would need to pay attention to include the horn, safety warning devices, the lights, the gauges and the overhead guard. Any burnt out light bulbs or faulty components must be replaced as soon as they are noticed. It is also imperative to check the wiring.
After the above components have been checked carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each battery cell has to be checked in order to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The fuel filters, hydraulic filter and the transmission filter must be replaced regularly. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make certain to apply some grease. Inspect the belts on the engine for any frays or cracks. If you find any, fix the issue accordingly. Next, inspect every other part of the machine like the wheels. If any type of issue or fault is detected, be sure to deal with it immediately in order to make sure the machine is running at its safest and optimum levels.