Utilize a Pneumatic Forklift
You can usually find pneumatic forklifts in shipping and warehouse operations. Also called pump trucks or pallet trucks, they are utilized in order to transport supplies and products around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight has a pump which raises the forks off the ground. A pallet truck is intended to be operated by one individual.
To be able to prevent loosing control while raising heavy loads, pallet trucks must always be operated with care. Machine must be inspected prior to operating. Clear the wheels area of any obstacle. Check that the handle turns smoothly. The pallet should be carefully stacked in order to guarantee that nothing would fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop in order to lower the forks and release the air in the pump. The forks could then be pushed into the pallet slots. The forks must be in the middle to be able to ensure even distribution of the pallet's weight across them. Raise the forks from the ground by pumping the pneumatic lift's handle until the pallet has cleared the ground completely. Do not raise the pallet very high or the forklift can unbalance.
Pull on the handle and drag it behind you if you want to move the pallet. It is really dangerous to push the pallet in front of you since the thrust can cause it to go out of control. Take turns slowly and don't attempt to stop suddenly. Slowly stop, squeeze the lever, and the forks will lower to the ground. Lastly, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.